document number: 20038 for technical questions, contact: thickfilmchip@vishay.com www.vishay.com revision: 29-oct-10 227 d ap, crcw-ap vishay draloric thick film, rectangular chip resistors for conductive gluing features ? agpd-terminations for conductive gluing ? stability r/r = 1 % for 1000 h at 70 c ? metal glaze on high quality ceramic ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition notes ? these resistors do not feature a limited lifetime when operated wi thin the permissible limits. ho wever, resistance value drift increasing over operating time may result in exceeding a limi t acceptable to the specific application, thereby establ ishing a functional time. ? marking and packaging: see datasheet "surface mount resistor ma rking" (document number 20020) ? power rating depends on the max. temperature at the joint point, the component placement density and the substrate material. note (1) the power dissipation on the resistors generates a temperatur e rise against the local ambient, depending on the heat flow suppo rt of the printed-circuit board (thermal re sistance). the rated dissipation applies only if the per mitted film temperature of 155 c is n ot exceed. standard electrical specifications model size rated dissipation p 70 w limiting element voltage u max. ac/dc temperature coefficient ppm/k tolerance % resistance range series inch metric d10 ap 0402 rr 1005m 0.063 50 100 200 1 5 100r to 10m 10r to 10m e24; e96 e24 zero-ohm-resistor: r max. < 200 m , i max. = 0.5 a d11 ap 0603 rr 1608m 0.10 75 100 200 1 5 18r to 10m 3r6 to 10m e24; e96 e24 zero-ohm-resistor: r max. < 200 m , i max. = 0.7 a d12 ap 0805 rr 2012m 0.125 150 100 200 1 5 18r to 10m 3r6 to 10m e24; e96 e24 zero-ohm-resistor: r max. < 200 m , i max. = 0.8 a d25 ap 1206 rr 3216m 0.25 200 100 200 1 5 18r to 10m 3r6 to 10m e24; e96 e24 zero-ohm-resistor: r max. < 200 m , i max. = 1.0 a crcw1210-ap 1210 rr 3225m 0.50 200 100 200 1 5 18r to 10m 3r6 to 10m e24; e96 e24 zero-ohm-resistor: r max. < 200 m , i max. = 1.5 a crcw1218-ap 1218 rr 3246m 1.0 200 100 200 1 5 18r to 2m2 3r6 to 2m2 e24; e96 e24 zero-ohm-resistor: r max. < 200 m , i max. = 2.0 a crcw2010-ap 2010 rr 5025m 0.75 400 100 200 1 5 18r to 10m 3r6 to 10m e24; e96 e24 zero-ohm-resistor: r max. < 200 m , i max. = 1.8 a crcw2512-ap 2512 rr 6332m 1.0 500 100 200 1 5 18r to 10m 3r6 to 10m e24; e96 e24 zero-ohm-resistor: r max. < 200 m , i max. = 2.0 a technical specifications parameter unit d10 ap d11 ap d12 ap d25 ap crcw1210-ap crcw1218-ap crcw2010-ap crcw2512-ap rated dissipation p 70 (1) w 0.063 0.1 0.125 0.25 0.5 1.0 0.75 1.0 limiting element voltage u max. ac/dc v 50 75 150 200 200 200 400 500 insulation voltage u ins. (1 min) v > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300 insulation resistance > 10 9 category temperature range c - 55 to + 155 failure rate h -1 < 0.1 x 10 - 9 weight mg 0.65 2 5.5 10 16 29.5 25.5 40.5
www.vishay.com for technical questions, contact: thickfilmchip@vishay.com document number: 20038 228 revision: 29-oct-10 d ap, crcw-ap vishay draloric thick film, rectangular chip resistors for conductive gluing notes (1) preferred way for ordering products is by use of the part number. (2) detailed bv number will appear on the packaging label. part number and product description (equal to or smaller than 1206 case size) part numbering: d1208058b5620fp5 (1) model/size special character tcr value tolerance pac k ag i n g special d100402 d110603 d120805 d251206 8 = agpd terminations for conductive glueing b = 100 ppm/k a = 200 ppm/k 0 = jumper 3 digit value 1 digit multiplier multiplier 7 = *10 -3 8 = *10 -2 9 = *10 -1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 4 = *10 4 5 = *10 5 6 = *10 6 0000 = jumper f = 1 % j = 5 % 0 = jumper p0 p5 pn pz b5 bn up to 2 digits product description: d12 ap 100 562r 1 % p5 d12 ap 100 562r 1 % p5 bvxxxxx model tcr resistance value tolerance pac k ag i n g special (2) d10 ap d11 ap d12 ap d25 ap 100 ppm/k 200 ppm/k 49k9 = 49.9 5r1 = 5.1 k 0r0 = jumper 1 % 5 % p0 p5 pn pz b2 b4 b5 bn customized part number is available on request part number and product description (equal to or larger than 1210 case size) part numbering: crcw2010562rfkb4ap (1) model/size special character tolerance tcr pac k ag i n g special crcw1210 crcw1218 crcw2010 crcw2512 r = decimal k = thousand m = million 0000 = jumper f = 1.0 % j = 5.0 % z = jumper k = 100 ppm/k n = 200 ppm/k 0 = jumper b2 b4 up to 2 digits ap = conductive gluing product description: crcw2010-ap 100 562r 1 % b4 crcw2010-ap 200 562r 5 % b4 bvxxxxx model tcr resistance value tolerance packaging special (2) crcw1210-ap crcw1218-ap crcw2010-ap crcw2512-ap 100 ppm/k 200 ppm/k 10r = 10 562r = 562 10k = 10 k 1m = 1 m 0r0 = jumper 1 % 5 % b2 b4 customized part number is available on request 5 p f 0 2 6 5 b 8 5 0 8 0 2 1 d p a 4 b k f r 2 6 5 0 1 0 2 w c r c
document number: 20038 for technical questions, contact: thickfilmchip@vishay.com www.vishay.com revision: 29-oct-10 229 d ap, crcw-ap thick film, rectangular chip resistors for conductive gluing vishay draloric note (4) flame treated paper for sizes d10 and d11. regular paper for sizes d12 and d25. dimensions packaging model unit pa pe r ta p e acc. iec 60286-3, type i (4) blister tape acc. iec 60286-3, type ii quantity code quantity code d10 ap 180 mm/7" 10 000 p0 330 mm/13" 50 000 pz d11 ap 180 mm/7" 5000 p5 5000 b5 285 mm/11.25" 10 000 p0 330 mm/13" 20 000 pn 20 000 bn d12 ap 180 mm/7" 5000 p5 5000 b5 285 mm/11.25" 10 000 p0 330 mm/13" 20 000 pn 20 000 bn d25 ap 180 mm/7" 5000 p5 5000 b5 285 mm/11.25" 10 000 p0 330 mm/13" 20 000 pn 15 000 bn crcw1210-ap 180 mm/7" 5000 p5 285 mm/11.25" 10 000 p0 330 mm/13" 20 000 pn crcw1218-ap 180 mm/7" 4000 b4 crcw2010-ap 180 mm/7" 4000 b4 crcw2512-ap 180 mm/7" 2000 b2 4000 b4 size dimensions in millimeters gluing pads dimensions in millimeters inch metric l w h t1 t2 a b l 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.05 0.2 + 0.10 - 0.15 0.4 0.6 0.5 0603 1608 1.55 + 0.10 - 0.05 0.85 0.1 0.45 0.05 0.3 0.2 0.3 0.2 0.9 0.9 1.0 0805 2012 2.0 + 0.20 - 0.10 1.25 0.15 0.45 0.05 0.3 + 0.20 - 0.10 0.3 0.2 0.9 1.3 1.3 1206 3216 3.2 + 0.10 - 0.20 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 1.1 1.7 2.3 1210 3225 3.2 0.2 2.5 0.2 0.55 0.05 0.45 0.2 0.4 0.2 0.9 2.5 2.0 1218 3246 3.2 + 0.10 - 0.20 4.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 1.05 4.9 1.9 2010 5025 5.0 0.15 2.5 0.15 0.6 0.1 0.6 0.2 0.6 0.2 1.0 2.5 3.9 2512 6332 6.3 0.2 3.15 0.15 0.6 0.1 0.6 0.2 0.6 0.2 1.0 3.2 5.2
www.vishay.com for technical questions, contact: thickfilmchip@vishay.com document number: 20038 230 revision: 29-oct-10 d ap, crcw-ap vishay draloric thick film, rectangular chip resistors for conductive gluing functional performance 1000 100 10 1 0.1 0.01 sin g le pulse pulse load max. (w) p 2512 121 8 2010 1210 1206 0 8 05 0603 0402 10 -6 pulse duration i (s) t 10 -5 10 -4 10 -3 10 -2 10 -1 1 10 100 maxim u m p u lse load, single p u lse; applica b le if p 0 and n < 1000 and ? ? max. ; for permissi b le resistance change e qu i v alent to 8 000 h operation 1000 10 1 0.1 0.01 10 -6 continuous pulse maxim u m p u lse load, contin u o u s p u lses; applica b le if p p ( ? am b ) and ? ? max. ; for permissi b le resistance change e qu i v alent to 8 000 h operation pulse duration i (s) continuous pulse load max. (w) t p 100 10 -5 10 -4 10 -3 10 -2 10 -1 1 10 100 2512 121 8 2010 1210 1206 0 8 05 0603 0402 2000 200 0 10 - 6 10 - 5 10 - 4 10 - 3 10 - 2 10 - 1 110 pulse volta g e maxim u m p u lse v oltage, single and contin u o u s p u lses; applica b le if p p max. ; for permissi b le resistance change e qu i v alent to 8 000 h operation pulse duration i (s) 400 600 8 00 1000 1200 1400 1600 1 8 00 pulse volta g e max. (v) 2512 2010 1206/1210/121 8 0 8 05 0603 0402 t ?
document number: 20038 for technical questions, contact: thickfilmchip@vishay.com www.vishay.com revision: 29-oct-10 231 d ap, crcw-ap thick film, rectangular chip resistors for conductive gluing vishay draloric - 55 - 25 0 25 50 75 100 125 155 175 120 100 8 0 60 40 20 0 70 deratin g ambient temperature in c fraction of rated dissipation in % 10 120 resistance value r in attenuation of 3rd harmonic a 3 in db non-linearity 100 8 0 40 60 20 0 100 1k 10k 100k 1m 10m 1206, 2010 0 8 05 0603 0402 100 1k 10k 100k 1m 10m 100 10 1 0.1 0.01 current noise a 1 in v/v current noise 2010 1206 0 8 05 0603 0402 resistance value r in
www.vishay.com for technical questions, contact: thickfilmchip@vishay.com document number: 20038 232 revision: 29-oct-10 d ap, crcw-ap vishay draloric thick film, rectangular chip resistors for conductive gluing all tests are carried out in accordance with the following specifications: ? en 60115-1, generic specification ? en 140400, sectional specification ? en 140401-802, detail specification ? iec 60068-2, environmental test procedures packaging of components is done in paper or blister tapes according to iec 60286-3. test procedures and requirements en 60115-1 clause iec 60068-2 test method test procedure requirements permissible change ( r ) stability class 2 or better stability for product types: d ap, crcw-ap 18 to 10 m 3.6 to 10 m 4.5 - resistance - 1 % 5 % 4.13 - short time overload u = 2.5 x 2 x u max. ; duration: acc. to style ( 0.25 % r + 0.05 ) 4.8.4.2 - temperature coefficient (20/- 55/20) c and (20/125/20) c 100 ppm/k 200 ppm/k 4.19 14 (na) rapid change of temperature 30 min. at - 55 c; 30 min. at 125 c 5 cycles (0.25 % r + 0.05 ) 1000 cycles (1 % r + 0.05 ) 4.25.1 - endurance at 70 c u = u max. ; 1.5 h on; 0.5 h off; 70 c; 1000 h (1 % r + 0.05 ) (2 % r + 0.1 ) 70 c; 8000 h (2 % r + 0.1 ) (4 % r + 0.1 ) 4.24 78 (cab) damp heat, steady state (40 2) c; (93 3) % rh; 56 days (1 % r + 0.05 ) 4.25.3 - endurance at upper category temperature 155 c, 1000 h (1 % r + 0.05 ) p 70 x r p 70 x r
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
